The right platform trolley is the one sized for your real daily load, not the biggest number on a spec sheet. For most warehouse and retail operations, a 300–500 kg trolley with a 90 × 60 cm deck covers 80% of tasks; anything heavier belongs on a pallet truck. This guide walks you through the five decisions that actually matter — load capacity, deck size, deck material, wheels and handle — so you can specify trolleys that survive your working conditions instead of failing in month three.
What a Platform Trolley Is (and When You Should Use One)
A platform trolley is a flat deck mounted on four castors with a push handle, designed to move boxed, bagged or loose goods that are too heavy to carry but too awkward for a pallet. It fills the gap between hand carrying and forklift work: hospital corridors, hotel back-of-house, retail stockrooms, workshop floors and last-meter delivery all live in this gap.
If your loads are already palletized and your floors are warehouse-grade, skip straight to pallet equipment — our plastic pallet FAQ hub covers that side. Platform trolleys earn their keep where pallets cannot go.
Step 1: Start With Your Real Load, Not the Catalogue Maximum
Rated capacity is the load a trolley can carry under ideal conditions: static weight, evenly distributed, on flat ground. Your working reality is worse — one-sided stacking, door thresholds, expansion joints, ramps at the loading dock. As a rule of thumb, spec a trolley rated at 1.5× your heaviest routine load. If your staff regularly move 200 kg of bottled water, buy a 300 kg rated trolley, not a 250 kg one.
How to Calculate Your Working Load
- Weigh the worst carton, not the average. One 40 kg carton on a 150 kg trolley is fine; five of them plus an enthusiastic pusher at a dock lip is not.
- Add shock loading. Rolling over a 15 mm threshold can briefly triple the load on the leading castor.
- Count people. Two-person loads end up one-person loads on Friday afternoons. Buy for the worst case.
Step 2: Deck Size — Match the Trolley to Your Aisles and Cargo
Deck size is where most buyers get it wrong. Too small and loads overhang and topple; too large and the trolley will not turn in your aisles. A useful field test: add the deck length to roughly one metre of body space and check that figure against your tightest 90-degree turn.
Common Deck Dimensions and What They Fit
| Deck size | Typical use | Turning footprint (approx.) |
|---|---|---|
| 73 × 45 cm | Boxes, tote bins, office moves, hotel linen runs | ~1.7 m turning circle |
| 90 × 60 cm | Retail replenishment, workshop parts, most warehouse work | ~1.9 m turning circle |
| 100 × 60 cm | Long cartons, stacks of crates, beverage cases | ~2.0 m turning circle |
| 150 × 60 cm and up | Bulk goods, long profiles — needs wide aisles | 2.5 m+ — measure before ordering |
A 90 × 60 cm deck accepts four 60 × 40 cm euro containers with a small overhang, which is why it is the default for distribution. If you move standardized crates, buy the deck around the crate: measure the container footprint first. Our guide to stackable vs nestable plastic crates helps you fix that footprint before you commit.
Step 3: Deck Material — Plywood, Steel or Plastic?
Plywood decks are cheap and light but swell at the edges when mops, rain or cold-store condensation touch them. Steel decks handle point loads and abuse but add 10–15 kg to the trolley and eventually rust at scratches. HDPE plastic decks will not rust, will not rot, wipe clean for food or pharma environments, and stay silent in use — the trade-off is a lower point-load tolerance, so very heavy, narrow-footed items need load-spreading plates.
For food processing, hotels, hospitals, cold rooms and any humid climate, plastic decks are the sensible default. For metal stampings and heavy engineering parts, steel wins.
Step 4: Wheels Decide Everything
Users judge a trolley by its wheels. Two specs matter: wheel material and wheel diameter.
Wheel Material Guide
| Wheel material | Best floor | Avoid |
|---|---|---|
| PU (polyurethane) | Tile, epoxy, concrete — quiet, non-marking | Debris-strewn yards |
| Rubber | Uneven concrete, outdoor ramps — good grip | Long carpet runs (drag) |
| TPR | Hospitals, hotels — very quiet, light loads | Heavy loads above 300 kg |
| Nylon | Wet areas, cold stores, rough yards — tough, cheap | Noise-sensitive indoor floors |
On diameter: 100 mm wheels for smooth indoor floors and light loads, 125–150 mm as the warehouse standard, and 200 mm where thresholds, dock plates or outdoor surfaces are part of the route. Bigger wheels roll over obstacles that stop smaller ones dead — a 200 mm wheel climbs a 20 mm lip that would trap a 75 mm castor.
Step 5: Handle and Frame Details Worth Paying For
- Fixed vs folding handle: folding handles save space in delivery vans and shared storage, but a fixed tubular handle survives abuse better. Fleet users doing 50+ trips a day should stay fixed.
- Powder coating vs galvanizing: powder coat looks better and suits indoor fleets; galvanized or plastic-deck frames are the choice for washdown and outdoor use.
- Two brakes minimum: at least two castors with total-lock brakes stop both rolling and swiveling — essential on dock plates and ramps.
- Bumper edging: rubber corner guards protect door frames; in hotels this detail alone justifies the upgrade.
A Ten-Second Buyer Checklist
- Rated capacity ≥ 1.5× heaviest routine load ✔
- Deck fits your largest standard container footprint ✔
- Deck material matches your environment (moisture = HDPE) ✔
- Wheel diameter matches your worst floor obstacle ✔
- Wheel material matches your flooring and noise rules ✔
- Two total-lock brakes fitted ✔
- Spare castors available from the same supplier ✔
Freight and Ordering Notes for Importers
Platform trolleys are voluminous but light, so they ship efficiently disassembled: decks stacked, handles and castors in cartons. A 40 ft container typically absorbs several hundred flat-packed units depending on deck size. Confirm the packing configuration before you compare quotes — a factory price that includes flat-pack export packing is worth more than a slightly lower FOB price that does not. Our MOQ, sample and FCL shipping policy page explains how we handle trial orders and full-container programs, and if you are qualifying a new supplier for the first time, the 12-point supplier audit checklist is a practical starting script.
Frequently Asked Questions
What size platform trolley do I need for a warehouse?
For general warehouse work, a 90 × 60 cm deck with 300–500 kg capacity and 125–150 mm PU or rubber wheels covers most tasks. Measure your tightest 90-degree turn first, and size the deck to your standard container footprint rather than the largest carton you occasionally move.
Is a plastic deck better than plywood for trolleys?
In humid, wet, or washdown environments, yes — HDPE decks will not swell, rot, or rust and are easy to sanitize. Plywood is cheaper and adequately strong for dry indoor use but fails at the edges once moisture gets in. For food, pharma, hotels, and tropical climates, choose a plastic deck.
How much weight can a platform trolley carry?
Common ratings run from 150 kg for light office models to 500 kg for heavy warehouse versions. Treat the rating as an ideal-condition maximum and buy at 1.5× your heaviest routine load, because thresholds, ramps, and uneven stacking all push real stresses well above the label figure.
Which wheels are best for a platform trolley?
PU wheels are the default for smooth indoor floors: quiet and non-marking. Rubber suits rough concrete and ramps. Nylon wins in wet areas and cold stores. For routes with thresholds or dock plates, prioritize wheel diameter — 200 mm wheels roll over obstacles that stop 75 mm castors completely.



